Single Line Resistance Lubrication System(SLR)
Single line resistance lubrication systems (SLR) are available in two styles: an oil single line resistance lubrication system and a grease single line resistance lubrication system.
Advantages: Compact structure and small footprint – Delivery to each lubricating point – Easy to add or subtract lube points – Special seal structures protect against contamination
Oil SLR Lubrication System: Working pressure is 0.17-2.5MPa. The lubricant used is oil in a viscosity range of 20 ~ 750mm2/s. The system apportions lubricant proportionally via a cyclic lubrication system utilizing meter units, or via a continuous lubrication system utilizing control unit flow rates.
Cyclic lubrication system: In the system, lubricant is provided to meter units. The meter units apportion the lubricant proportionally in ratio relationships according to the flow rate. Continuous lubrication system: In the system, lubricant is provided to control unit. The control unit apportions the lubricant proportionally in ratio relationships according to the flow rate.
Application: The system is widely used on textile machinery, machine tools, package machinery, printing machinery, wooden machinery, plastic machinery, forge machinery and elevators.
Grease SLR lubrication system: Working pressure is lower than 4.0MPa. The lubricant used is grease type NLGI 000#~00#.
Application: The system is widely used on textile machinery, machine tools, package machinery, printing machinery, wooden machinery, plastic machinery, forge machinery and elevators.
contact us immediately: yongshengfactory@163.com
Most Commented Posts